#Profibus_DP
;
; IMPORTANT: 
;   This is a template. You may use it as a basis for the development of your 
;   device's GSD file. You may only use Ident numbers that have been assigned 
;   to you by the certification office (pls. see links below). 
;   Please note: The Ident number needs to be set in the device's script as well. 
;
;   Please make use of the information and documentation available from PI on www.profibus.com. 
;     https://www.profibus.com/products/product-certification/
;     https://www.profibus.com/products/certification-office/
;     https://www.profibus.com/download/
;
GSD_Revision        = 5
Ident_Maintenance_supp  = 1
;
Vendor_Name         = "Deutschmann Automation"
Model_Name          = "UNIGATE IC2 PROFIBUS"
Revision            = "V1.7"
Ident_Number        = 0x3218
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "A"
Software_Release    = "1.0.x"
;
9.6_supp            = 1
19.2_supp           = 1
45.45_supp          = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 15
MaxTsdr_19.2        = 15
MaxTsdr_45.45       = 15
MaxTsdr_93.75       = 15
MaxTsdr_187.5       = 15
MaxTsdr_500         = 15
MaxTsdr_1.5M        = 20
MaxTsdr_3M          = 35
MaxTsdr_6M          = 50
MaxTsdr_12M         = 95
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "UNIGATE IC2"
Bitmap_Device	    = "UG-IC2PB"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
Publisher_supp      = 1		;data transfer to other slaves possible (DPV2-publisher)
;
Modular_Station     = 1
Max_Module          = 16
Max_Input_Len       = 244
Max_Output_Len      = 244
Max_Data_Len        = 488
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 9
Max_Diag_Data_Len   = 11
;
DPV1_Slave          = 1

C1_Read_Write_supp     = 1
C1_Max_Data_Len        = 80		;excluding function_num, slot_number, index, length
C1_Response_Timeout    = 300

Max_Initiate_PDU_Length = 52
C2_Read_Write_supp     = 1
C2_Max_Data_Len        = 80		;excluding function_num, slot_number, index, length
C2_Response_Timeout    = 300
C2_Read_Write_required = 1
C2_Max_Count_Channels  = 2
;
DPV1_Data_Types        = 0
;
Max_User_Prm_Data_Len      = 237		;9..237, depending on actual hardware used.
;
PrmText=1
Text(0)="disabled"
Text(1)="enabled"
EndPrmText

ExtUserPrmData=1 "DPV1mode"
Bit(7) 0 0-1
Prm_Text_Ref=1
EndExtUserPrmData

Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00
Ext_User_Prm_Data_Ref(0)   = 1
;
; <Module-Definition-List>
Module 		    = "1 byte I/O (consistent)" 0xB0
1
EndModule
Module 		    = "2 byte I/O (consistent)" 0xB1
2
EndModule
Module 		    = "4 byte I/O (consistent)" 0xB3
3
EndModule
Module 		    = "8 byte I/O (consistent)" 0xB7
4
EndModule
Module 		    = "16 byte I/O (consistent)" 0xBF
5
EndModule
Module 		    = "16 words I/O (consistent)" 0xFF
6
EndModule
Module 		    = "32 words I/O (consistent)" 0xFF,0xFF
7
EndModule
; Module 		    = "64 words I/O (inconsistent)" 0xFF,0xFF,0xFF,0xFF
Module 		    = "64 words I/O (consistent)" 0xC0,0xFF,0xFF
8
EndModule
Module 		    = "122 words in" 0x5F,0x5F,0x5F,0x5F,0x5F,0x5F,0x5F,0x59
9
EndModule
Module 		    = "122 words out" 0x6F,0x6F,0x6F,0x6F,0x6F,0x6F,0x6F,0x69
10
EndModule
;
Module 		    = "1 byte in 1 byte out (cons.)" 0x90,0xA0
11
EndModule
Module 		    = "8 byte in 8 byte out (cons.)" 0x97,0xA7
12
EndModule
Module 		    = "16 byte in 16 byte out (cons.)" 0x9F,0xAF
13
EndModule
Module 		    = "16 words in 16 words out (cons.)" 0xDF,0xEF
14
EndModule
;