#Profibus_DP
GSD_Revision        = 1
;
Vendor_Name         = "Deutschmann Automation GmbH"
Model_Name          = "ROTARNOCK 4 Profibus-DP"
Revision            = "V1.2"
Ident_Number        = 0x3231
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "-"
Software_Release    = "V5.0"
OrderNumber	    = "V3231"
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Implementation_Type = "SPC3"
Bitmap_Device	    = "Rot4"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
;
Modular_Station     = 1
Max_Module          = 16
Max_Input_Len       = 26
Max_Output_Len      = 10
Max_Data_Len        = 36
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 10	;SPS
Max_Diag_Data_Len   = 8
;
;   1. 0xB7,0xD1,0x50,0x9B	8 Byte I/O (konsistent) + 2 Worte (kons) + 1 Wort + 12 Byte (kons) zur SPS
;   2. 0xB7,0xD1,0x50,0x9B,0xA1	8 Byte I/O (konsistent) + 2 Worte (kons) + 1 Wort + 12 Byte (kons) zur SPS + 2 Byte von SPS (für Logik R4)
;   3. 0xB7,0xD2,0x9B	        8 Byte I/O (konsistent) + 3 Worte (kons) + 12 Byte (kons) zur SPS
;
Module 		    = "S7DB+Proc.Data" 0xB7,0xD1,0x50,0x9B
EndModule
Module 		    = "S7DB+Proc.Data+Logic" 0xB7,0xD1,0x50,0x9B,0xA1
EndModule
Module 		    = "Proc.Data R4 CPU 318" 0xB7,0xD2,0x9B
EndModule
;