#Profibus_DP
;
; Historie:
; =========
; V1.0  01.12.2004 La Original
; V1.1  18.02.2005 La Ident-Nr changed
; V1.2  24.03.2005 La Modular_station=0, modul "S7DB (universal)" new, other modules disabled;
;
GSD_Revision        = 1
;
Vendor_Name         = "Deutschmann Automation GmbH"
Model_Name          = "R100-PB (mit Para)"
Revision            = "V1.2"
Ident_Number        = 0x3606
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "-"
Software_Release    = "V2.1"
OrderNumber	    = "V3406"
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 15
MaxTsdr_19.2        = 15
MaxTsdr_45.45       = 15
MaxTsdr_93.75       = 15
MaxTsdr_187.5       = 15
MaxTsdr_500         = 15
MaxTsdr_1.5M        = 20
MaxTsdr_3M          = 35
MaxTsdr_6M          = 50
MaxTsdr_12M         = 95
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "VPC3"
Bitmap_Device	    = "Rot"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 1
;
Modular_Station     = 0
;
Fail_Safe           = 0
Slave_Family        = 10	;SPS
Max_Diag_Data_Len   = 8
;
User_Prm_Data_Len          = 3
User_Prm_Data              = 0x00,0x00,0x00
Max_User_Prm_Data_Len      = 8
;
PrmText=1
Text(0)="Keine Totzeitkompenation"
Text(1)="Blockweise Totzeitkompenation"
Text(2)="Bitweise Totzeitkompenation"
Text(3)="Blockw. TZK (Ein-/Auszeiten)"
Text(4)="Bitw. TZK (Ein-/Auszeiten)"
EndPrmText

ExtUserPrmData=1 "Totzeit-Typ"
Unsigned8 2 0-4
Prm_Text_Ref=1
EndExtUserPrmData

ExtUserPrmData=2 "Virtuelle Auflösung"
Unsigned16 4096 2-32500
EndExtUserPrmData

;
; Aufbau der Userspezifischen Paramterdaten:
;
; Offset:  0    1    2    3     4        5+6         7     
;         0x00 0x00 0x00 0x01 TZ-Typ  Virt.Aufl. Komm.Mode(0=S7,1=Komm.Prof)
;
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00, 0x01	;Dieser Teil ist constant
Ext_User_Prm_Data_Ref(4)   = 1
Ext_User_Prm_Data_Ref(5)   = 2				;Parameterbyte 5+6 (Word)
;
;   S7-Mode:
;   ========
;   1. 0xB7,0xD1,0x50,0x9B	8 Byte I/O (konsistent) + 2 Words (kons) + 1 Word + 12 Byte (kons) to PLC
;   2. 0xB7,0xD1,0x50,0x9B,0xA1	(Logik-Input 1..16 from PB)
;   3. 0xB7,0xD2,0x9B		8 Byte I/O (konsistent) + 3 Words (kons) + 12 Byte (kons) to PLC (S7-318)
;
;Module 		    = "S7DB,Proc.Data,No_Logic"		0xB7,0xD1,0x50,0x9B
;Ext_Module_Prm_Data_Len    = 1
;Ext_User_Prm_Data_Const(0) = 0
;EndModule
;
;Module 		    = "S7DB,Proc.Data,Logic16" 		0xB7,0xD1,0x50,0x9B,0xA1
;Ext_Module_Prm_Data_Len    = 1
;Ext_User_Prm_Data_Const(0) = 0
;EndModule
;
;Module 		    = "S7DB,Proc.Data(CPU318)"		0xB7,0xD2,0x9B
;Ext_Module_Prm_Data_Len    = 1
;Ext_User_Prm_Data_Const(0) = 0
;EndModule
;
;
; The following modules will be used in all Deutschmann cam-switch units (R80,R100,L100,L200)
; So it is recommended to use one of these modules for S7-Mode
;
; Data S7->CSU:      Logik (optional)
; +----+-- ... --+----+....+....+
; |Multiplexer for DB |1-8 |9-16|
; +----+-- °°° --+----+....+....+
;    0   1 ... 6    7  
;
; Data CSU->S7:                                                   
; +----+-- ... --+----+----+----+----+----+----+----+----+----+----+----+-----+-----+-----+-----+
; |Multiplexer for DB |     Position      |  Speed  |Prog|Err.|1-8 |9-16|17-24|25-32|33-40|41-48|
; +----+-- °°° --+----+----+----+----+----+----+----+----+----+----+----+-----+-----+-----+-----+
;    0   1 ... 6    7    8    9   10   11   12   13   14   15   16   17    18    19    20    21
;
;
; 2 byte  logik (8..1,16..9) from S7 [optional]  -----------------------------+
; 6 byte  for actual outputs (8..1,16..9,..,48..41)  --------------------+    |
; 1 byte  for actual error code  -----------------------------------+    |    |
; 1 byte  for actual program  ---------------------------------+    |    |    |
; 1 word  for speed  -------------------------------------+    |    |    |    |
; 2 words for position  -----------------------------+    |    |    |    |    |
; 8 byte multiplexer for DB-transfer  ----------+    |    |    |    |    |    |
;                                               v    v    v    v    v    v    |
Module 		    = "S7DB(universal)"       0xB7,0xD1,0xD0,0x90,0x90,0x95 ; |
Ext_Module_Prm_Data_Len    = 1						    ; |
Ext_User_Prm_Data_Const(0) = 0						    ; |
EndModule                                                                   ; | 
;									    ; v	
Module 		    = "S7DB(uni.)+Logic16"    0xB7,0xD1,0xD0,0x90,0x90,0x95,0xA1
Ext_Module_Prm_Data_Len    = 1
Ext_User_Prm_Data_Const(0) = 0
EndModule
;
;
;   Kommunikationsprofil:
;   =====================
;   4. 0xBC        13 Byte I/O (kons.)
;   5. 0xBC 0xD2 0x95, 0x91, 0xA1
;      13 Byte I/O (kons.), 3 Word->S7, 6 Byte (kons.)->S7, 2 Byte (kons)->S7, 2 Byte (kons)<-S7 
;      Kommprof-Daten       Pos,Speed   48 Outputs          Akt.Prog,Error     Logik Input (1..16)
;
Module 		    = "Komm.Profil,No_Logic" 		0xBC
Ext_Module_Prm_Data_Len    = 1
Ext_User_Prm_Data_Const(0) = 1
EndModule

Module 		    = "KommProf,Proc.Data,Logic16"	0xBC,0xD2,0x95,0x91,0xA1
Ext_Module_Prm_Data_Len    = 1
Ext_User_Prm_Data_Const(0) = 1
EndModule
;