Products » Fieldbus/Industrial Ethernet » Protocol Converter » Unigate CL » UNIGATE® CL-RS (Modbus RTU, ASCII, 3964R, RK512...)
UNIGATE® CL-RS (Modbus RTU, ASCII, 3964R, RK512...)
Converter from your protocol to standard protocols, such as Modbus RTU, RK512, 3964R...
The Deutschmann UNIGATE® Gateway connects devices, such as automation components and e.g. Modbus RTU via their serial interface. With it the UNIGATE® takes over the task of a Protocol Converter and converts the different interfaces. Marketable standard protocols, such as Modbus ASCII, Modbus RTU (Master or Slave), RK 3964, RK 3964R, Universal 232, Transparent mode and many more can be set by means of a simple configuration via the PC-tool WINGATE. The UNIGATE® CL Profinet is exceptionally flexible and powerful because of its Script ability and it is suitable for requirements that go beyond the standard protocols or for the conversion of your own protocols. This Script is generated with the free PC-tool Protocol Developer and it is optimally adapted to the final product and requirements of the Profinet-Master. No changes have to be made in the final product's firmware.
Application
Deutschmann UNIGATE® ProfibusDP is ideal for the use with terminal-units that do not have their own Profibus-interface. The standard DIN-rail version features the protection type IP24.
Scope of functions
The Deutschmann UNIGATE® Gateway uses the complete data capacity of ProfibusDP, that is 244 byte and supports all speeds up to a maximum of 12 Mbit/s. The complete performance range of a Profibus Slave is supported by UNIGATE®. For the Profibus-connection a 9-pole D-SUB connector is provided, the connection of the serial side is made through screw-plug-connector. The Profibus ID can either be set by means of the integrated rotary coding switch, through the Profibus itself or the Script. A large number of diagnosis LEDs signal the state of the device on the Profibus-side as well as on the serial side.
The special advantage of the UNIGATE® CL-series is the Script-ability. Thus any changes in the firmware of the terminal-unit are not necessary. Due to the Script the user has all liberties and possibility, from a simple transparent data transfer over the generation of complex protocols up to editing data.
Your advantage
With Deutschmann UNIGATE® CL-modules you bring existing components (also older devices) into modern networks. As device manufacturer you save the development of the interface based on the corresponding Fieldbus or Ethernet. Due to the continuity of the Deutschmann UNIGATE® CL-series Scripts that have been generated once can be used practically without changes for other types of the UNIGATE® CL-series based on other Fieldbuses and Ethernet. The firmware adaptation of your own terminal-units becomes unnecessary.
Hotline and Support
A team of qualified specialists will assist you with the selection of the device, start-up, configuration and the generation of the Script. This offer is completed by trainings to the different subject areas.
Quick info UNIGATE® CL-RS (Modbus RTU, ASCII, 3964R, RK512...)
- Supports protocols, such as Modbus RTU (Master and Slave)
- Optional galvanic isolation of the RS-sides possible
- RS232, RS 422-, RS485- and SSI-interface on board
- Baudrate of the device's serial interface adjustable up to 625,000 bit/s
- When using the RS485-device interface up to 32 participants can be connected
- Unigate CL-Profinet - protocol converter from serial interface to Profinet
- Generation of the Script through the free Protocol Developer
- No change in the Firmware of your terminal-unit necessary
- Exchangeable for other Deutschmann Fieldbus Gateways and the types based on Ethernet
Technical data
| Dimensions (BxDxH in mm) |
23 x 115 x 100 |
|---|---|
| Mounting | DIN-rail |
| Voltage supply | 10 up to 33 Volt DC Protection against incorrect polarity, short circuit and overload integrated |
| Current consumption | Typ. 120mA, max. 150mA |
| Operating temperature | 0°C up to +55°C |
| Fieldbus functions | All specified ProfibusDP Slave functions |
| Technology | ASIC |
| Certificates | Profibus, CE |
| Galvanic division | Optional for the serial side, standard for the bus side |
Order data
| Order designation | Description | Order no. |
| UNIGATE CL-RS | DIN-rail module with seral interface - RS232, 422 and 485 on-board - to RS. Additional Debug-interface, Housing sky blue RAL 5015 |
V3546 |
|---|---|---|
| UNIGATE CL-GY-RS | DIN-rail module with seral interface - RS232, 422 and 485 on-board - to RS. Additional Debug-interface, housing light grey RAL 7035 |
V3783 |
| Optional | Galvanic separation RS-side (RS-Interface) | on request |
| Optional | Neutral version | on request |
| Optional | Customized design | on request |
| Starterkit Unigate CL-RS | Starterkit Unigate CL-RS includes 1 Unigate CL-RS, debug cable, application cable, adapter cable PC, power supply, Manual, Software | P1080 |
| USB-RS232 Converter | USB-RS232 Converter, 20cm | V3654 |
| USB-RS232 Converter incl. adapter cable | USB-RS232 Converter incl. adapter cable for Unigate CL-Range | P1208 |